To begin, it is essential to verify that the current floor and walls are strong and even. Any splits or harm should be fixed before any labour starts. The floor ought to then be covered with a waterproof layer like a sheet of plywood or a tanking set. The tanking unit should incorporate a self-adhesive waterproof film that is applied to the floor and up the dividers. This film ought to be fixed at the edges and around apparatuses to guarantee the watertight dependability of the wet room.
The walls should be covered with water-resistant tiles and the gaps between them sealed with a waterproof adhesive. The ground should also be tiled using waterproof tiles, with the joints treated with a waterproof sealer. Finally, the whole area must be sealed with a watertight sealant.
Eventually, a drain should be fitted to guarantee that any liquid is swiftly and securely extracted from the wet room. The drain must be linked to the primary sewer pipe and should have a sump installed in order to avert any bad smells from coming into the space.
After this has been carried out, the wet room can be used with confidence. By executing these steps, one can guarantee that their wet room will be secure and efficient.
Contact our Liverpool-based team regarding wet room installation to learn more.